This Disappears When Logged In

Rack Help

Discussion in 'Electricity/Wiring' started by jono007, Jan 15, 2011.

  1. jono007

    jono007 New Member

    so i have a simple rack 5 shelvesholds 20 shoe box tub. im just lost with the thermostat hook up i have not bought one yet, not sure which one to get. one i have the heat tape on the rack and wired to the thermostat how do i keep the rite temp? does the prob stay inside one of the tubs or ontop of the heat tape?
    and any opinions about thermostats would be greatly apprieicated.
    thanks,
    john
     
  2. jeepguy

    jeepguy Elite Member

    Put the probe on the tape and I use ranco stats.
     
  3. volkert13b

    volkert13b Well-Known Member

    i have my rack system hooked up to 3inch flexwatt with a herpstat ND. i had my probe directly on the tape but my temp readings on the herpstat were 10 degress higher than the tape..so i put the probe in a empty tub and a accurite thermostat to measure hot, cool and humidity of the tub.
     

Share This Page